Your cart is empty
0
items
Subtotal:$0.00
:
from
to
Clear
Clear
 |
Genuine OEM 13627792261 - Manifold Absolute Pressure Sensor Seal
Product Overview
This Genuine OEM manifold absolute pressure sensor seal (MPN 13627792261) is the factory-specification replacement for the MAP sensor housing on diesel-powered BMW vehicles. The seal maintains proper pressure integrity in the intake manifold sensor circuit, which is critical to accurate engine load measurement and emissions control on turbocharged diesel engines. This part fits BMW 335d and X5 xDrive35d models equipped with the 3.0L turbocharged diesel inline-six engine across multiple model years. As a Genuine OEM part, it carries the same factory warranty and engineering standards as components supplied to BMW dealerships.
This sensor seal is sold individually. Verify your specific vehicle application using the fitment tool above before ordering.
Cross Reference Numbers
This Genuine OEM 13627792261 is equivalent to the following part number: 1362779226.
Vehicle Compatibility
This part fits the popular models below. For Fitment Confidence, please use the vehicle selector tool above to verify exact compatibility for your vehicle.
- BMW 335d 3.0 L6 Diesel (E90): 2009–2011
- BMW X5 xDrive35d 3.0 L6 Diesel (E70): 2009–2013
This may also fit other applications. Please use the vehicle selector tool to verify fitment.
Frequently Asked Questions
How do I know if my BMW 335d or X5 needs a new MAP sensor seal?
A failing MAP sensor seal may cause rough idle, hesitation during acceleration, reduced fuel economy, or a check engine light. The seal prevents air leaks in the sensor circuit; degradation allows unmetered air to enter the engine, confusing the engine control module. If you notice any of these symptoms on your E90 335d or E70 X5 xDrive35d, inspect the sensor housing for cracks or deterioration before replacing the seal.
Is this seal part of a larger sensor assembly?
This is a replacement seal for the manifold absolute pressure sensor housing. The seal alone addresses minor leaks or wear at the sensor connection point. If the sensor itself is faulty or the housing is cracked, you may need to replace the entire sensor assembly. Consult your service manual or a technician to determine whether seal replacement alone will resolve your symptoms.
Can I install this seal myself?
Sensor seal replacement typically requires removing the intake manifold cover and disconnecting the sensor connector. Basic hand tools and a small amount of mechanical aptitude are usually sufficient. However, the diesel intake manifold can be tight on space, and care must be taken not to damage surrounding hoses or connectors. If you are unfamiliar with engine bay work, have a professional technician perform the installation to avoid accidental damage.
Why is a Genuine OEM seal better than an aftermarket alternative?
Genuine OEM seals are engineered to BMW factory specifications and are manufactured to the exact tolerances required for your E90 or E70 diesel engine. They carry the same warranty protection as parts installed at a BMW dealership and ensure proper sensor function without compatibility risk. Aftermarket seals may vary in material quality or fit, potentially leading to continued air leaks or sensor malfunction.
Why Shop at eEuroparts.com?
- Proven Expertise: Over 25 years of experience with European vehicles means we know your car inside and out.
- Fitment Confidence: Our accurate cataloging ensures you get the right part the first time, backed by our fitment guarantee.
- Fast, Reliable Shipping: Most in-stock orders ship the same or next business day from our U.S.-based warehouse.
- Transparent Pricing: Competitive prices with no hidden fees or surprise charges.
- Exclusive Kits That Fitâ„¢: Complete repair solutions with no guesswork.
- Established Trust: Serving the European car community since 2000.
Order Genuine OEM 13627792261 today. In-stock orders ship same or next business day from our U.S. warehouse, and our fitment team is one call away if you need help confirming the right part for your BMW 335d or X5.
Note: All information on this page and in the FAQ is for general reference only. Verify fitment and consult a professional as needed. eEuroparts.com is not responsible for incorrect part selection or installation.
- BrandGenuine OEM
- ManufacturerGenuine OEM
- MPN13627792261
- Part TypeManifold Absolute Pressure Sensor Seal
- OE Part Numbers13-62-7-792-261, 13627792261
- Fitment
- Fitment TypeVehicle Specific
| Year | Make | Model | Submodel | Notes |
|---|---|---|---|---|
| 2009 | BMW | 335d | Base (3.0 L6 DIESEL) | |
| 2009 | BMW | X5 | xDrive35d (3.0 L6 DIESEL) | |
| 2010 | BMW | X5 | xDrive35d (3.0 L6 DIESEL) | |
| 2010 | BMW | 335d | Base (3.0 L6 DIESEL) | |
| 2013 | BMW | X5 | xDrive35d (3.0 L6 DIESEL) | |
| 2012 | BMW | X5 | xDrive35d (3.0 L6 DIESEL) | |
| 2011 | BMW | 335d | Base (3.0 L6 DIESEL) | |
| 2011 | BMW | X5 | xDrive35d (3.0 L6 DIESEL) |
Warranty Overview
At eEuroparts, we stand behind the quality of the products we sell. Every part we offer is backed by a warranty designed to give you peace of mind and protect your investment.
Standard Warranty – Most Parts
Coverage: 2 years or 24,000 miles (whichever comes first) from purchase date.
Protection: Defects in materials or workmanship under normal personal use.
Eligibility: Applies only to the original purchaser and the vehicle where the part was first installed.
Exclusions:
Wear-and-tear items (brake pads, filters, bulbs, wipers, etc.)
Commercial, fleet, rideshare, off-road, or racing use
Improper installation, misuse, accidents, or modifications
Not Covered: Labor, shipping, towing, or incidental costs.
Bison Performance Warranty – Our House Brand
Coverage: Limited Lifetime Warranty for as long as you own your vehicle.
Applies To: All products sold under the Bison Performance label.
Premium Protection: Goes beyond our standard warranty — if it’s a Bison product, the 2-year/24k mile limit is replaced with lifetime coverage.
Exclusions: Same as the standard warranty (normal wear, commercial use, improper installation, etc.).
What’s Included: Replacement of the defective product (labor and shipping excluded).
Warranty Claim Requirements
To keep claims fast and fair, we require:
Proof of purchase (invoice or order confirmation).
Photos or videos showing the defective part, order number, date, VIN, and odometer reading.
Diagnostic reports or part returns for non-visible issues may be requested.
Claims must be truthful, properly documented, and reflect normal consumer use.
Buy With Confidence: We back our products because we believe in their quality, with a transparent, customer-first warranty process you can trust. And with Bison Performance products, you’ll enjoy Limited Lifetime protection—an assurance few brands can match.
For full details and exclusions, please see our complete Warranty Terms & Conditions.
This summary is for convenience only. For full warranty coverage details, exclusions, and requirements, see our official Warranty Terms & Conditions. In case of conflict, the full policy governs.
Return Policy Overview
Most parts can be returned within 30 days of delivery if unused, uninstalled, and in original packaging.
To start a return, contact customer support via Chat or Contact Us.
Restocking fee: Up to 20% may apply for certain orders (buyer’s remorse, order errors, or special-order items)
Refunds: Issued to your original payment method within 3–5 business days after inspection
Exchanges: Not automatic — please return and reorder
Replacements: May be approved for incorrect or defective items reported within 7 days
Not returnable:
Used or installed parts
Electrical components
Opened filter kits, gaskets, or contaminated items
Final sale or custom orders
Important Notes:
Return shipping is your responsibility unless we made a verified error
Fitment is the customer’s responsibility (we can assist, but do not guarantee)
Country of origin may vary and is not grounds for return
For complete details, please see our full Return Policy.
This Returns summary is provided for convenience only. All returns, refunds, and exchanges are subject to the complete Returns Policy. In the event of any conflict, the full policy governs.
Fast, Reliable Shipping — Straight to Your Door
We ship most orders the same day when placed before 2 PM CST (Monday–Friday). Our main warehouse is just east of Nashville, TN, and we also ship from multiple locations nationwide to get your order to you as quickly as possible.
We use trusted carriers like UPS, FedEx, and USPS.
Tracking info is emailed to you as soon as your order ships.
Delivery estimates at checkout are based on carrier data, but not guaranteed.
Need help with a shipment?
If your order is missing, damaged, or incorrect, just let us know within 5 days of delivery. We’ll walk you through the quick claim process — including a few photos to help us make things right.
For complete details, please see our full Shipping Policy.
This Shipping summary is provided for convenience only. Delivery times, carrier terms, fees, restrictions, risk of loss, and other details are governed by our complete Shipping Policy. In the event of any conflict, the full policy governs.
