Porsche Crankshaft Seal – Front (65x85x10mm) 99911305752 – Elring 494500
$7.75
Crankshaft seals, also referred to as ‘main’ seals, are located at either end of the crankshaft and allow the crankshaft to spin freely and distribute power to the clutch and transmission, while keeping engine oil in and contaminants out of your engine’s crankcase. If you see oil leaking from the front crank pulley, oil dripping from the bottom of the clutch housing, or notice clutch slip caused by oil spraying on the clutch, check your crankshaft seals. When one of the crankshaft seals wears out, you must replace them to avoid oil loss, which can seriously damage you engine and make a big mess in your driveway. Main seals generally last over 200,000 miles or 20 years, but should be considered as a job for any restoration regardless of age, as access is generally limited in these positions. Keep in mind that occasionally special tools are required to install main seals evenly.
Delivery Info
eEuroparts.com® proudly offers wholesale prices and fast shipping available on most orders. Every eEuroparts.com® order is track-able, meaning you'll know exactly where your Engine Crankshaft Seal is at every step of the shipping process. When your order is assigned tracking, we'll send you an email with the tracking number. Most orders have a tracking number within a couple of hours after being placed with eEuroparts.com®.
Returns Info
eEuroparts.com® proudly offers a thirty (30) day cash return for all items purchased through eEuroparts.com®. The item must be new and in its original manufacturer packaging to be eligible for a cash refund. If you would like to return an item or have questions about the process, please contact us and one of our customer service experts will be happy to help. This information is only a summary. Complete shipping and return policy information can be found in our web site policies.
| Dust Cover | without dust lip |
| Height [Mm] | 10 |
| Inner Diameter [Mm] | 65 |
| Material | MVQ (Silicone Elastomer) |
| Outer Diameter [Mm] | 85 |
| Radial Shaft Seal Design | AW |
| Brand | Part # |
|---|
| Brand | Part # |
|---|---|
| FEL-PRO | 226520 |
| Glaser | P77629-01 / P7762901 |
| Goetze | 50-300263-00 / 5030026300 |
| Porsche | 999.113.057.50 / 99911305750 |
| Porsche | 999.113.057.51 / 99911305751 |
| Porsche | 999.113.057.52 / 99911305752 |
| Victor Reinz | 80-15332-20 / 801533220 |
| Victor Reinz | 81-15332-20 / 811533220 |
| Year | Make | Model | Submodel | Engine | Fuel Type | Position | Note |
|---|---|---|---|---|---|---|---|
| 1983 | Porsche | 911 | SC | 3.0H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1982 | Porsche | 911 | SC | 3.0H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1981 | Porsche | 911 | SC | 3.0H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1980 | Porsche | 911 | SC | 3.0H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1979 | Porsche | 911 | SC | 3.0H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1978 | Porsche | 911 | SC | 3.0H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1977 | Porsche | 911 | S | 2.7H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1977 | Porsche | 911 | Turbo Carrera | 3.0H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1976 | Porsche | 911 | S | 2.7H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1976 | Porsche | 911 | Turbo Carrera | 3.0H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1975 | Porsche | 911 | S | 2.7H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1975 | Porsche | 911 | Carrera | 2.7H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1974 | Porsche | 911 | Base | 2.7H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1974 | Porsche | 911 | Carrera | 2.7H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1974 | Porsche | 911 | S | 2.7H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1973 | Porsche | 911 | T | 2.3H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1972 | Porsche | 911 | T | 2.3H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1972 | Porsche | 914 | Base | 2.0H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1971 | Porsche | 911 | T | 2.2H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1971 | Porsche | 911 | E | 2.2H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1971 | Porsche | 911 | S | 2.2H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1971 | Porsche | 914 | 6 | 2.0H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1970 | Porsche | 911 | T | 2.2H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1970 | Porsche | 911 | E | 2.2H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1970 | Porsche | 911 | S | 2.2H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1970 | Porsche | 914 | 6 | 2.0H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1969 | Porsche | 911 | T | 2.0H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1969 | Porsche | 911 | S | 2.0H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1969 | Porsche | 911 | E | 2.0H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1968 | Porsche | 911 | L | 2.0H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1968 | Porsche | 911 | S | 2.0H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm | |
| 1967 | Porsche | 911 | S | 2.0H6 | GAS | Dust Cover: without dust lip; Inner Diameter: 65mm; Outer Diameter: 85mm; Swirl Type: Left-hand Twist; Width: 10mm |
eEuroparts.com is the best place to get high-quality car parts at prices that can't be beat. We're happy to offer a wide range of Elring parts, a well-known name in the auto industry that has been making great gaskets and other parts for a long time.
Elring is the best when it comes to making high-quality seals. Head gaskets, sealing solutions, and other things are among their goods. Because this business is dedicated to precision engineering, both professional mechanics and car enthusiasts know that the products they sell are of high quality. You can use Elring gaskets for regular maintenance or for fixes that need Elring head gaskets because they are reliable and of high quality.
At eEuroparts.com, we're happy to offer Elring parts at low prices. We work hard to keep all of our Elring goods at prices that won't break the bank because we know how important it is to keep your car in great shape without spending a fortune.
In order to make sure you get your Elring parts quickly, we offer low prices and prioritize fast shipping. We know that every second counts when it comes to fixing cars, that's why we work hard to meet your needs as fast as we can. You can be sure that your Elring gaskets will get to you quickly because we ship them quickly. Elring gaskets, Elring head gaskets, and other ElringKlinger car parts that you need can be found at eEuroparts.com. You can also call us at (800) 467-9769 and order your parts by phone. Shop with us today, and experience the improvement that Elring and eEuroparts.com can do for your car.
